Description of the software
6.4 Description of the menu commands
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
107
6.4.2.8 Go to
The "Edit" > "Go to" menu command opens a dialog window in which you can select and
enter the search criteria:
Action Result
Searching by "Element number" The chosen function is selected.
Searching by "Name" The function to which the specified element
identifier is assigned is selected.
Searching by "Page" The page with the page number selected by you
in the current diagram is displayed.
The page number is structured as follows:
<Diagram name:H1V1>.
This page number is indicated in the logic
diagram view and on every printout at the bottom
right.
This menu command can only be selected if the logic diagram is active.
6.4.2.9 Insert comment
Using the "Edit" > "Insert comment" menu command, you can insert a comment anywhere in
the logic diagram.
This menu command can only be selected if you are in the offline mode and the logic
diagram is active.
6.4.2.10 Realign graphic
Using the "Edit" > "Realign graphic" menu command, you can optimize the arrangement of
the safety circuit in the graphical view (in the logic diagram):
● Overlaps are removed.
● Functions that overlap connections, each other, or page limits are moved.
● Connections that overlap each other are moved.
● The functions are arranged according to the signal flow.
This menu command can only be selected if you are in the offline mode and the logic
diagram is active.
6.4.2.11 Interrupt connection
The menu command "Edit" > "Interrupt connection" replaces the connecting line between
two functions with arrows, in order to keep the configuration clear in the logic diagram. The
connection is retained.
This menu command can only be selected if the logic diagram is active and an interrupted
connection is selected.
To Next Page
Loading...
