Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
145
● After the automatic arrangement, functions and connections can be moved and adapted.
● Use the menu command "Edit" > "Undo" to undo the new arrangement.
Note
Following the command "Realign graphic", comments are always moved below the logic.
6.6.4.7 Move the diagram
Activating and deactivating the move mode
In the move mode, you can move the diagram using the mouse if it is larger than the current
window.
● Click on the button "Move diagram"
to activate the move mode.
● Click on the button again to deactivate the move mode.
Note
Special features in the move mode
• When the move mode is activated, you cannot select and move objects or draw
connections.
• The mouse pointer is represented by a hand symbol when the move mode is
activated.
Alternatively, the diagram can be moved using the cursor keys.
6.6.4.8 Zoom dialog
You can zoom in or zoom out in a diagram step by step using the menu command "View" >
"Zoom in" or "View" > "Zoom out". The zoom factor is increased or decreased by a fixed
value.
Zooming in and out can also be executed as follows:
● Mouse click on the graphical work space > Keep the key "Ctrl" pressed > Use the mouse
wheel.
● Mouse click on the graphical work space > Click on the "+" or "-" key.
To Next Page
Loading...
