Siemens SIRIUS 3RK3 - Redraw Partial Connection

Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
151
● Selecting a reference point
Single mouse click (on the tip of the arrow):
The reference point and the corresponding reference point are selected:
– Double mouse click (on the tip of the arrow):
The corresponding reference point is selected (if necessary, the window is scrolled
down so that the corresponding reference point becomes visible):
– Deleting a reference point
– Select the reference point.
– Delete the reference point and thus the entire connection between the respective
functions by means of the menu command "Edit" > "Delete".
– You can also "Delete" via the context menu (right mouse button), command "Delete"
or by selecting the reference point + pressing the <Del> key.
Note
Special features of reference points
• When a reference point or an individual partial connection is deleted, the entire
connection (including the second partial connection) is deleted.
• Rerouting a partial connection at the reference point (detaching) is not possible.
• Moving the reference point onto another reference point is not possible.
• Moving the reference point onto a terminal is not possible.
• Rerouting a partial connection at the function is possible.
6.6.4.12 Redraw partial connection
Restoring an interrupted connection
Use the menu command "Edit" > "Redraw partial connection" to restore an interrupted
connection.
Call:
Button Command
"Edit" > "Redraw partial connection"