Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
152 System Manual, 10/2008, 926 2530-02 DS 02
Procedure
1. Select the partial connection.
Alternatively, you can also select the reference point.
2. Select the menu command "Edit" > "Redraw partial connection" or click on the button
"Redraw partial connection".
6.6.4.13 Highlight signal flow
Highlight objects in color
With the menu command "View" > "Highlight signal flow", you highlight the following objects
in the logic diagram in color:
● All functions and connections that indirectly send signals to an input of the selected block
(signal flow on the input side).
● All functions and connections to which the signals of all outputs of the selected function
are sent directly or indirectly (signal flow on the output side).
Call:
Button Command
"View" > "Highlight signal flow"
Highlighted elements
Figure 6-10 Highlight signal flow
To Next Page
Loading...
