Description of the software
6.4 Description of the menu commands
Modular Safety System 3RK3
110 System Manual, 10/2008, 926 2530-02 DS 02
• the company name
• the name of the file in which your password is encrypted and saved
3. Send this file with the activation information to the Siemens hotline.
4. The Siemens hotline will send you a file with an activation code.
5. Import the file with the activation code using the "Edit" > "Forgot password" menu
command. This menu command can only be selected if you have previously created the
activation data.
6. Assign a new project access password.
Note
The activation code is only valid once.
6.4.2.20 Reset password for project access...
Requirement
The "Edit" > "Reset password for project access" menu command can only be selected if you
have previously created the file for resetting forgotten passwords in the "Forgot password"
dialog window using the "Password for project access" menu command.
Importing a file
Reset the password as follows:
● In the "Reset password for project access" dialog window, click on the "Import" button.
● In the "Open" window that follows, open the file containing the data saved for resetting
the passwords, which you received from the Siemens hotline.
● When prompted, assign a new password for project access.
● After the password has been correctly assigned, you will receive confirmation that the
access password has been successfully reset.
6.4.2.21 Password for device access...
Using the "Edit" > "Password for device access" menu command, you can carry out the
following actions:
● Assign/change/reset the password for device access
● Set the protection level
To Next Page
Loading...
