Siemens SIRIUS 3RK3 - Symbols of the Toolbar in the Logic Diagram

Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
138 System Manual, 10/2008, 926 2530-02 DS 02
6.6.3 Symbols of the toolbar in the logic diagram
Icons and commands
The following table shows the icons in the toolbar and associated menu commands relevant
to the logic diagram:
Button Command
"Edit" > "Insert comment"
"Edit" > "Realign graphic"
"Edit > "Interrupt connection"
"Edit" > "Redraw partial connection"
"Edit" > "Add diagram"
"Edit" > "Remove diagram"
"View" > "Zoom in"
"View" > "Zoom out"
"View" > "Zoom dialog"
"View" > "Overall view"
"Display settings"
"Change grid settings"
"Move diagram"
"View" > "Highlight signal flow"
"View" > "Delete highlighting"
"Edit" > "Delete"
"Target system" > "Diagnostics logic" > "Monitor"
"Target system" > "Diagnostics logic" > "Force" > "Force to "0" "
"Target system" > "Diagnostics logic" > "Force" > "Force to "1" "
"Target system" > "Diagnostics logic" > "Force" > "Cancel forcing"
"Target system" > "Diagnostics logic" > "Force" > "Cancel forcing (all)"