Siemens SIRIUS 3RK3 - Working with the Logic Diagram; Selecting Functions and Using Them in the Diagram; Connecting Functions

Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
139
6.6.4 Working with the logic diagram
6.6.4.1 Selecting functions and using them in the diagram
Inserting functions
Insert the functions by selecting them in the catalog window and then drag and drop them
into the work space.
Defining parameters
When you drag a function into the work space, a dialog window pops up where you can
define the function parameters. For this you must activate the checkbox "Display object
properties automatically on insert" in the menu "Options" > "Settings of Modular Safety
System ES" under the tab "General settings".
You can also open the dialog window subsequently by double-clicking on the function in the
work space.
For more information about parameters, refer to "Functions".
Selecting functions in the diagram
To select a function already inserted in the diagram, double-click on the entry of the
corresponding function in the catalog window.
By double-clicking on this function in the catalog window again, the next function of this type
is selected in the diagram.
6.6.4.2 Connecting functions
Rules for drawing connections
● Several connections can originate from an output of a function.
● Only one connection can be connected to an input of a function.