Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
137
● Current states (e.g. digital outputs of functions) of the MSS ES can be monitored in the
diagnostics mode.
● Working with the logic diagram:
– The user can switch between languages during operation.
– Optimization functions (e.g. arranging the functions according to the signal flow).
– Placing and connecting the functions by means of drag & drop.
– Functions and connections can be moved as required.
– Comments can be placed in the screen and printout as required.
– Structuring of the logic by generating partial diagrams (e.g. one output circuit per
diagram).
– Clarity of a diagram by interrupting connections and replacing them by freely movable
reference points.
To Next Page
Loading...
