Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
147
Zoom center point
If no object is selected in the diagram, the center point of the screen is selected for zooming:
6FUHHQFHQWHUSRLQW
Figure 6-8 Before zooming
6FUHHQFHQWHUSRLQW
Figure 6-9 Center point of screen is selected for zooming
If one or several objects are selected in the diagram, the center point of the selected
object/area is selected for zooming.
If the zoom function is carried out repeatedly this zoom center point is moved step by step to
the center of the screen.
To Next Page
Loading...
