Siemens SIRIUS 3RK3 - Page 161

Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
159
Rule Type Message Remedy
A function must not overlap
another function.
Warning Logic: The function element <function
name> (no. [element number])
overlaps another function element.
Move the function or execute "Realign
graphic".
A connection must not
overlap another one.
Warning Logic: A connection overlaps another
connection.
Move the connection or associated
function element, or execute "Realign
graphic".
A comment field overlaps a
page limit.
Warning Logic: A comment field overlaps the
page limit.
Move the comment.
A comment field overlaps
another comment field.
Warning Logic: A comment field overlaps
another comment field.
Move the comment.
A comment field overlaps a
connection.
Warning Logic: A comment field overlaps a
connection.
Move the comment/connection.
A function element overlaps
a comment field.
Warning Logic: The function element <\1> [no.
\2] overlaps a comment field.
Move the function element/comment
field.
A reference point of an
interrupted connection
overlaps a connection.
Warning Logic: A reference point of an
interrupted connection overlaps
another connection.
Move the connection or execute
"Realign graphic".
A reference point of an
interrupted connection
overlaps another reference
point.
Warning Logic: A reference point of an
interrupted connection overlaps with
another reference point.
Change the safety circuit accordingly
or execute "Realign graphic".
A function element overlaps
a reference point of an
interrupted connection.
Warning Logic: The function element <\1> [no.
\2] overlaps a reference point of an
interrupted connection.
Change the safety circuit accordingly
or execute "Realign graphic".
A reference point of an
interrupted connection
overlaps the page limit.
Warning Logic: A reference point of an
interrupted connection overlaps the
page limit.
Change the safety circuit accordingly
or execute "Realign graphic".
A comment field element
overlaps a reference point of
an interrupted connection.
Warning Logic: A comment field overlaps a
reference point of an interrupted
connection.
Change the safety circuit accordingly
or execute "Realign graphic".
The set program cycle time
has been exceeded
Error Logic: The set program cycle time
has been exceeded. Reduce the
number of function elements.
Alter safety circuit accordingly or
increase program cycle time
If the channels of a module
are wired to the monitoring
function "Safety shutdown
mat (cross-circuit principle)",
the other channels of this
module should not be used
with:
• another monitoring
function "Safety
shutdown mat (cross-
circuit principle)"
• another monitoring
function with activated
cross-circuit.
Warning Logic: <[element type]> (no. [element
number]) - cross-circuit detection
activated (channels of
<[BMK/slot/subslot no.]> are wired to
the monitoring function <safety
shutdown mat (cross-circuit
principle)> <[element type]> (no.
[element number]> wired).
Change the safety circuit accordingly
The internal memory on the
MSS ES is full
Error "General configuration: The internal
memory of the MSS ES is full.
Reduce the scope of the logic"
Reduce the scope of the logic
(through optimization, for example)