Siemens SIRIUS 3RK3 - Page 257

Diagnostics / service
8.3 Diagnostics with diagnostics module
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
255
Invert the display
This setting makes it possible to specify whether the display should be displayed normally or
inverted. The readability of the display can be improved in the event of difficult lighting
conditions.
The desired setting can be marked with the arrow keys. The right key (OK) selects the
marked setting.
Messages
This setting makes it possible to specify whether to automatically switch to the "Messages"
menu if messages are pending and to display the messages (default setting) or whether the
status display should remain.
The desired setting can be marked with the arrow keys. The right key (OK) selects the
marked setting.
Factory settings
The factory setting makes it possible to reset the display settings to the default settings.
The desired setting can be marked with the arrow keys. The right key (OK) selects the
marked setting. A prompt for confirmation then follows that also has to be confirmed with the
right key (OK).