Overview
3.3 System components
Modular Safety System 3RK3
24 System Manual, 10/2008, 926 2530-02 DS 02
Diagnostics module
With the diagnostics module, you can check and analyze the diagnostics and status data of
the MSS and acknowledge errors on site or from a central location.
The diagnostics module has the following properties:
● The diagnostics module shows diagnostics data on its display in the form of plaintext.
● The diagnostics module is intended to be installed in a control panel / control cabinet door
and is connected to the central unit or, if present, to the interface module.
● If required, a PC / PG can be connected to the diagnostics module.
Parameterization software
The MSS ES parameterization software provides a graphical editor (logic diagram) for
entering and displaying the interconnection logic and a diagnostics functionality.
The MSS ES parameterization software provides the following functionalities:
● You use the logic diagram to parameterize the safety functions for the MSS.
● You save the parameterized functions in the central unit using the optional PC cable.
● You can also upload an existing configuration from the central unit to the PC / PG.
● The diagnostics functionality of the software enables you to diagnose the MSS online.
● You can force outputs when configuring the MSS.
To Next Page
Loading...
