Diagnostics / service
8.6 Restoring factory settings
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
285
● All configuring information in the internal memory of the central unit is deleted.
● If the external memory module is plugged in, all the existing data is deleted.
Note
Alternatively, the factory settings can be restored by means of MSS ES; see also
Commands... (Page 116).
Note
Since communication is interrupted when the factory settings are being restored, you
must reboot the DP interface (power OFF/ON) once the factory settings have been
restored or switch the entire system off and then on again.
Note
Factory settings for DP interface
The factory settings for the DP interface can also be restored; see also
Menu mode with
user control (Page
227).
To Next Page
Loading...
