Description of the hardware
5.3 Connecting/wiring
Modular Safety System 3RK3
82 System Manual, 10/2008, 926 2530-02 DS 02
Disconnecting spring-loaded terminals
Step Operating instruction Figure
1 Insert the flat-head screwdriver into the square
opening of the spring-loaded terminal until it
engages. Please observe a 10° horizontal
angular deviation of the screwdriver to the oval
opening.
2 Remove the cable from the oval opening.
3 Remove the screwdriver.
~10°
~10°
3 mm
To Next Page
Loading...
