Siemens SIRIUS ACT 3SU1 - Page 328

IO-Link 3SU14
12.2 Electronic modules for ID key-operated switches
SIRIUS ACT 3SU1 pushbuttons and signaling devices
328 System Manual, 08/2018, A5E03457306020A/RS-AK/010
Manage authorization level (individually encodable ID keys)
There are two options of adding an individually encodable ID key to the memory of the
device:
1) Add the ID key that is inserted in the ID key-operated switch.
2) Add the ID key based on its number (as of firmware version 2.0.0).
Since any combination of the levels can be selected, the meaning of the level differs:
Meaning of "level"
FW 1.4.0 (or FW 2.0.0 in compatibility
mode)
FW 2.0.0
Level 4 pre-defined levels (numbers 0 - 4),
level 0 = no ID key inserted
16 combinations of the levels (1 bit for each
level)
Selecting the levels with FW 2.0.0:
• in the PCT using the checkbox
• with DS 79
Level 1
ID key can switch on DQ.0
ID key can switch on DQ.0
Level 2
ID key can switch on DQ.0, DQ.1
ID key can switch on DQ.1
Level 3
ID key can switch on DQ.0, DQ.1, DQ.2
ID key can switch on DQ.2
Level 4 ID key can switch on DQ.0, DQ.1,
DQ.2, DQ.3
ID key can switch on DQ.3
Note
ID key with level 0 (all of the levels set to zero) can be added. Not possible to switch on
DQ.0
– DQ.3 with this setting.