Commissioning
6.3 M200D components
M200D PROFIBUS/PROFINET
138 Manual, 08/2014, A5E01577426A/RS-AA/004
The overview shows the components you need for operation with PROFINET IO:
Figure 6-2 Minimal PROFINET configuration
Procedure at commissioning
1. Addressing (PROFIBUS only)
2. Mounting all components
– Bus cable
– Power supply
– Sensors/actuators
– Power supply
– Motor
3. Connecting all components
4. Parameterizing/programming
5. Commissioning
6. Monitoring/diagnostics
To Next Page
Loading...
