Appendix
A.2 Order numbers
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
221
Power supply connecting cable, one end prefabricated, 7/8" socket for screws, angled,
5-pin, 1.5 mm²:
3.0 m
5.0 m
10.0 m
3RK1902-3GB30
3RK1902-3GB50
3RK1902-3GC10
Power supply connecting cable, both ends prefabricated, 7/8" socket/pin for screws,
angled, 5-pin, 1.5 mm²:
3.0 m
5.0 m
10.0 m
3RK1902-3NB30
3RK1902-3NB50
3RK1902-3NC10
M12 screw caps for sealing unassigned input/output sockets
(one set contains ten screw caps)
3RK1901-1KA00
7/8" screw caps for sealing unassigned input/output sockets
(one set contains ten screw caps)
6ES7194-3JA00-0AA0
Motor controller with IO communication
Control cable, one end prefabricated/one end open, M12 angled cable connectors, degree
of protection IP67, 5 x 0.34 mm
2
(metal screw cap)
Cable length 5 m
Cable length 10 m
3RK1902-4HB50-5AA0
3RK1902-4HC01-5AA0
M12 coupler plug, straight, screw-type connection max. 0.75 mm
2
, 5-pin, A-coded,
max. 4 A
3RK1902-4BA00-5AA0
M12 coupler plug, angled, screw-type connection max. 0.75 mm
2
, 5-pin, A-coded, max. 4 A 3RK1902-4DA00-5AA0
M200D protection guards 3RK1911-3BA00
RS 232 interface cable 3RK1922-2BP00
USB interface cable 6SL3555-0PA00-2AA0
Hand-held device for motor starters for local control
Serial interface cable must be ordered separately
3RK1922-3BA00
Diagnostics and commissioning tool
3ZS1310-6CC10-0YA5
Identification label 9 x 20, petrol (19 frames, 380 labels) 3RT1900-1SB50
Dismantling tool for Han Q4/2 3RK1902-0AB00
Dismantling tool for Han Q8/0 3RK1902-0AJ00
To Next Page
Loading...
