Siemens SIRIUS M200D - Page 59

Functions
3.7 System monitoring
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
59
Settings
Device parameter
Default setting
Setting range
Input signal extension 0 ms 0 to 200 ms
Increment: 10 ms
Input signal delay 10 ms 10 ... 80 ms
Increment: 10 ms
Input 1 level Normally open
• Normally closed
• Normally open
Input 2 level
Input 3 level
Input 4 level
Input 1 action No action
• No action
• Trip without restart
• Trip with restart
• Trip end position CW
• Trip end position CCW
(RSte/sRSSte only)
• Group warning
• Manual mode local
• Emergency start
• Motor CW
• Motor CCW (RSte/sRSSte only)
• Quick stop
• Trip reset
• Cold run
Input 2 action
Input 3 action
Input 4 action
Input 1 signal Non-retentive
• Retentive
• Non-retentive
Input 2 signal
Input 3 signal
Input 4 signal