Mounting / connection
4.1 Mounting
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
93
You can use the following diagrams to determine the derating factors for horizontal, vertical,
or flat mounting.
DSte, RSte, sDSSte, sRSSte with bypass in "soft start" startup mode (from 7 A)
sDSSte, sRSSte with bypass in "direct" startup mode (from 7 A)
sDSSte, sRSSte without bypass in startup mode "Direct" and "Soft start"
DSte, RSte
= electronic starter
= electromechanical starter
Figure 4-2 Derating for horizontal mounting
To Next Page
Loading...
