Siemens SITRANS LUT400 - Introduction; The Manual; Manual symbols

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
13
Introduction
1
1.1 The Manual
This manual will help you set up your SITRANS LUT400 for optimum performance. For other
Siemens level measurement manuals, go to: www.siemens.com/level
(www.siemens.com/level
), and look under Level Measurement.
Note
•
This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency-based communications.
•
Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your SITRANS
LUT400.
•
This manual applies to the SITRANS LUT400 series only.
1.1.1 Manual symbols
Please note their use carefully.
Alternating Current
Direct Current
Earth (ground) Terminal
Protective Conductor Terminal
Caution (refer to instructions)
No co-axial cable connections