General Operation
7.15 SITRANS LUT400 Communication Systems
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
159
7.15.1.3 HART multi-drop mode
HART Multi-drop Mode allows the connection of multiple field devices through HART. To
setup a device in Multi-drop Mode, see Device Address (Page 160
). Details on the use of
Multi-drop Mode are outlined in an application guide
Working with HART, which can be
downloaded from the product page of our website. Go to: www.siemens.com/sitransLUT400
(
www.siemens.com/sitransLUT400) under Support and click on Application Guides.
7.15.1.4 SIMATIC PDM
This software package is designed to permit easy configuration, monitoring, and
troubleshooting of HART devices. The HART EDD for SITRANS LUT400 was written with
SIMATIC PDM in mind and has been extensively tested with this software.
For more information, see Operation via SIMATIC PDM 6 (HART) (Page 161).
7.15.1.5 HART Electronic Device Description (EDD)
In order to configure a HART device, the configuration software requires the HART
Electronic Device Description for the instrument in question.
You can download the HART EDD for SITRANS LUT400 from the product page of our
website. Go to: www.siemens.com/sitransLUT400 (www.siemens.com/sitransLUT400
) and
click on Support > Software Downloads.
Older versions of the library will have to be updated in order to use all the features of
SITRANS LUT400.
7.15.1.6 HART Status
Information on HART Status is outlined in an application guide Working with HART, which
can be downloaded from the product page of our website. Go to:
www.siemens.com/sitransLUT400 (
www.siemens.com/sitransLUT400) under Support and
click on Application Guides.
7.15.2 LUT400 Communication connections
The SITRANS LUT400 can be connected to a computer system via a HART modem
(connected to the mA OUT/HART terminal block), or directly connected via a Universal
Serial Bus (USB) cable (for use with the Web Browser interface). A HART network requires a
device address be configured. For communications via USB, connect SITRANS LUT400 to
your computer via the USB cable.
To Next Page
Loading...
