Siemens SITRANS LUT400 - Date (2.14.1.)

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
227
Using the string editor:
1. Use RIGHT/LEFT arrow to select the character position in the parameter field to be
edited.
2. As each character is highlighted (selected), use the UP/DOWN arrow to change the
character.
– Use the DOWN arrow to select a character from the string above the parameter value.
– Use the UP arrow to select a character from the string below the parameter value.
3. To escape without saving your changes, press LEFT arrow continually until ESC is
highlighted. Press
LEFT arrow again to escape without saving changes. Otherwise, when
new parameter value is correct, press
RIGHT arrow continually until OK is highlighted.
4. Press RIGHT arrow to accept the new value. The LCD returns to parameter view and
displays the new selection. Review for accuracy.
Special Characters:
Character
Description
Function
:
colon
enters colon in text string
space
enters space in text string
/
slash
enters slash in text string
-
hyphen
enters hyphen in text string
_
underscore
enters underscore in text string
’x’ in box deletes highlighted character in text string
][
square brackets inserts space between two characters in text string (limited to one
space between characters)
return arrow key deletes characters (including currently highlighted character) to
end of text string
9.2.14.1 Date (2.14.1.)
Date is the current date in the format: YYYY-MM-DD.
Values
Range: 1900-01-01 to 2155-12-31