Siemens SITRANS LUT400 - High Flowrate Alarm (2.8.9.)

SITRANS LUT400
204 Operating Instructions, 07/2019, A5E33329501-AC
Enable (2.8.8.1.)
Enables/disables Fail-safe Alarm.
Options
ENABLED
*
DISABLED
Assigned Relay (2.8.8.2.)
Determines which relay (if any) will be activated when the Fail-safe Alarm activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Alarm State (2.8.8.3.)
Read only. Used to view the current state of the Fail-safe Alarm.
Options
ACTIVE
INACTIVE
9.2.8.9 High Flowrate Alarm (2.8.9.)
Available only on LUT440 (OCM model).
Reported when the OCM flowrate is within a user-defined range (see High Flowrate Value
ON (2.8.9.2.) (Page 204) and High Flowrate Value OFF (2.8.9.3.) (Page 205)).
Enable (2.8.9.1.)
Enables/disables High Flowrate Alarm.
Options
ENABLED
*
DISABLED
High Flowrate Value ON (2.8.9.2.)
Sets the flowrate value (defined in Flowrate Units (2.15.3.7.) (Page 233)) at which the High
Flowrate Alarm will activate.
Values
Range: 0.000 to 99999.000
Default: 0.000