Siemens SITRANS LUT400 - Maintenance and Diagnostics (3.); Identification (3.1.)

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
239
9.2.16.5 Reset Daily Totalizer (2.16.5.)
Select YES to reset daily totalizer value to zero.
Options
*
NO
YES
9.2.16.6 Reset Running Totalizer (2.16.6.)
Select YES to reset running totalizer value to zero.
Options
* NO
YES
9.3 Maintenance and Diagnostics (3.)
Note
Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly
stated.
9.3.1 Identification (3.1.)
To edit parameters with a string editor (3.1.1. to 3.1.5.), see Using the string editor: on Date
and Time (2.14.) (Page 226).
9.3.1.1 TAG (3.1.1.)
Text that can be used in any way. A recommended use is as a unique label for a field device
in a plant. Limited to 32 alphanumeric characters (8 characters via HART). Appears in top
left corner of display in measurement mode (see The LCD Display (Page 52)).
9.3.1.2 Long TAG (3.1.2.)
Text that can be used in any way. A recommended use is as a unique label for a field device
in a plant. Limited to 32 alphanumeric characters.
9.3.1.3 Descriptor (3.1.3.)
Text that can be used in any way. Limited to 32 ASCII characters (16 ASCII characters via
HART). No specific recommended use.