Siemens SITRANS LUT400 - Vessel Shape (2.6.1.)

SITRANS LUT400
180 Operating Instructions, 07/2019, A5E33329501-AC
9.2.6.1 Vessel Shape (2.6.1.)
89Defines the vessel shape and allows the LUT400 to calculate volume instead of level. If
None is selected, no volume conversion is performed. Select the vessel shape matching the
monitored vessel or reservoir.
Vessel Shape
LCD Display/
Description
Also required
* None NONE/
No volume calculation required
N/A
LINEAR/
Upright, linear (flat bottom)
maximum volume
CYLINDER/
Flat end horizontal cylinder
maximum volume
PARABOLIC BOTTOM maximum volume,
dimension A
HALF SPHERE BOTTOM maximum volume,
dimension A
FLAT SLOPED BOTTOM maximum volume,
dimension A
PARABOLIC ENDS/
Parabolic end horizontal cylinder
maximum volume,
dimension A, di-
mension L