Siemens SITRANS LUT400 - Key Functions in Measurement Mode; Programming SITRANS LUT400

Commissioning
6.2 Activating SITRANS LUT400
SITRANS LUT400
54 Operating Instructions, 07/2019, A5E33329501-AC
6.2.1.3 Key functions in Measurement mode
Key
Function
Result
RIGHT arrow opens PROGRAM mode. Opens the top level menu.
UP or DOWN arrow toggles between PV and
SV.
LCD displays primary or secondary
value.
6.2.2 Programming SITRANS LUT400
Note
•
To enter Program mode using the device local push buttons, press . Press to
return to Measurement mode.
•
While the device is in Program mode, the output remains active and continues to respond
to changes in the device.
Change parameter settings and set operating conditions to suit your specific application. (For
remote operation, see Operation via SIMATIC PDM 6 (HART) (Page 161) or Operation via
AMS Device Manager (HART) (Page 164).)
Parameter menus
Note
For the complete list of parameters with instructions, see
Parameter reference (LUI)
(Page
167).
Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure, as in the example below. (For full menu see LCD menu structure
(Page 308).)
1. WIZARDS
2. SETUP
2.1 SENSOR
.........
2.7 PUMPS
2.7.1 BASIC SETUP
2.7.2 MODIFIERS
2.7.2.1.1 ENABLE