Siemens SITRANS LUT400 - Simulation (3.4.); Level (3.4.1.)

SITRANS LUT400
258 Operating Instructions, 07/2019, A5E33329501-AC
Acknowledged Status (3.3.6.8.)
Indicates which level of maintenance reminder has been acknowledged.
In SIMATIC PDM, open the menu View – Device Status, click on the Maintenance tab and
check the Calibration Schedule Status window.
Acknowledged (3.3.6.9.)
Acknowledges the current maintenance reminder.
To acknowledge a reminder via SIMATIC PDM:
1. Open the menu View – Device Status and click on the tab Maintenance.
2. In the Calibration Schedule Status section, click on Acknowledge Warnings.
To acknowledge a reminder via the local push buttons:
1. Navigate to Maintenance and Diagnostics (3.) (Page 239) > Maintenance (3.3.)
(Page 245) > Schedule (3.3.6.) (Page 255) > Acknowledged (3.3.6.9.), and RIGHT arrow
to acknowledge the reminder.
9.3.4 Simulation (3.4.)
Use simulation to test your application. For further details, see Application examples
(Page 79).
9.3.4.1 Level (3.4.1.)
Simulates level changes, and activates relays based on the setpoints programmed.
Level Simulation Enable (3.4.1.1.)
Enables/disables level simulation.
Options
*
DISABLED
ENABLED
Level Value (3.4.1.2.)
Enables/disables level simulation.
Values
Range: Low Calibration Point to High Calibration Point
Default: 0.000