Siemens SITRANS LUT400 - Low Level Alarms (2.8.2.)

SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
197
High Level Value OFF (2.8.1.3)
Sets the material level (defined in Units (2.1.1.) (Page 168)) at which the High Level Alarm
will de-activate.
Values
Range: 0.000 to 99999.000
Default: 0.000
Assigned Relay (2.8.1.4)
Determines which relay (if any) will be activated when the High Level Alarm activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Alarm State (2.8.1.5)
Read only. Used to view the current state of the High Level Alarm.
Options
ACTIVE
INACTIVE
9.2.8.2 Low Level Alarms (2.8.2.)
Reported when material level is within a user-defined range (see Low Level Value ON
(2.8.2.2.) (Page 197) and Low Level Value OFF (2.8.2.3.) (Page 198)).
Enable (2.8.2.1.)
Enables/disables Low Level Alarm.
Options
ENABLED
*
DISABLED
Low Level Value ON (2.8.2.2.)
Sets the material level (defined in Units (2.1.1.) (Page 168)) at which the Low Level Alarm
will activate.
Values
Range: 0.000 to 99999.000
Default: 0.000