Connecting
5.1 Connecting SITRANS LUT400
SITRANS LUT400
46 Operating Instructions, 07/2019, A5E33329501-AC
Note
Terminals 6 and 7 must be connected together.
Discrete Inputs used with external bias voltage
5.1.10 Remote mounted lid with extension cable
The optional display lid can be mounted remotely up to 5 m from the device. The optional
extension cable can be used for such an installation.
1. Remove display lid from the enclosure.
2. Carefully disconnect the existing display cable from the terminal board.
To Next Page
Loading...
