SITRANS LUT400
240 Operating Instructions, 07/2019, A5E33329501-AC
9.3.1.4 Message (3.1.4.)
Text that can be used in any way. Limited to 32 ASCII characters. No specific recommended
use.
9.3.1.5 Installation Date (3.1.5.)
Date the device was first commissioned (YYYY-MM-DD).
Manufacturer
Read only. The device manufacturer (for example: Siemens).
Product Name
Read only. Identifies the product by name (for example: SITRANS LUT400).
9.3.1.6 Product (3.1.6.)
Read only. Identifies the product by name and capability:
SITRANS LUT420 (Level)
SITRANS LUT430 (Pump and Flow)
SITRANS LUT440 (OCM)
9.3.1.7 Order No. (Order Number in PDM) (3.1.7.)
Read only. Order number for the current device configuration (for example: 7ML5050-
0CA10-1DA0).
9.3.1.8 Serial Number (3.1.8.)
Read only. Unique factory set serial number of the device.
9.3.1.9 Final Assembly Number (3.1.9.)
Integer used to identify the device on site, e.g. enter ’2’ to denote second SITRANS LUT400
in application.
9.3.1.10 Hardware Revision (3.1.10.)
Read only. Corresponds to the electronics hardware of the Field Device.
9.3.1.11 Firmware Revision (3.1.11.)
Read only. Corresponds to the software or firmware that is embedded in the Field Device.
To Next Page
Loading...
