Simplex 4100U Installation & Maintenance

1-10
• 4100-0625 Transponder Interface Card
• 4100-0160 Internet Interface Module (566-355).
• 4100-9848AU System Power Supply, Australian version.
• ME0456 Fan Control Module
The following kits are available:
• KT0419 A4 Document Holder, Stick-On, 3U High, Grey
• KT0446 4100U Expansion Bay
• KT0447 Expansion SPS, Bay Mounting
• KT0448 Fused DC Distribution Bd, XSPS AU Mounting
• KT0450 4100-4100U Upgrade, 19” RAC Mounting
• KT0452 IDNet Mounted on 4100 Interface Bracket
• KT0468 4100 MBd to 4100U Bay, Mounting Kit
• KT0469 A5 Document Holder, Stick-On, 3U High, Grey
Brigade Interfaces
• KT0199 19”, 3U ASE Mounting Bracket, plus
KT0207 ASE FAS Interface Loom
• FZ9028 19”, 3U AIU/PPU Mounting Bracket & Loom
LB0602 Operator I/F ISO/Test, Card
LB0605 Fan Control Zone Insert Card
526-873 Slide In Label, LED Switch Module, 1 Sheet of 6
4100-1294 Module Slide In Labels, Panel Set
LM0309 4100U Mains Lead With Filter
LM0310 4100U Battery Lead Set, 18U-21U (1976-132-1)
LM0311 4100U Battery Lead Set, 28U-40U (1976-132-2)
734-008 Harness, Power Comms, 4 Way, 2ft Length
734-075 Harness, Power Comms, 4 Way, 8ft Length
SX0039 Sw/LED Module Ribbon Cable, 26 Way, 2in
SX0052 Sw/LED Module Ribbon Cable, 26 Way, 6in
4100U PIDs, Continued
Kits
Labels
Looms

Simplex 4100U Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Max Signaling Line Circuits (SLC)	2
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Network Capability	Yes
Communication Protocol	RS-232, RS-485
Battery Backup	24 VDC
NAC Outputs	4
Signaling Line Circuits (SLCs)	2
Power Supply Current	3.0 A
Max Notification Appliance Circuits (NAC)	4
Max Releasing Circuits	4
Max Relay Circuits	4
Communication Ports	RS-232, RS-485