LC700 – User’s Guide
2.2
Racks, cables and accessories of LC700 system
Código Descrição
M-000 Blind module to fill empty slots
R-700-4A Rack with 4 slots - support to shielded flat cable
T-700 Terminator for last the rack – right side
FC-700-0 Flat Cable to connect 2 racks (6.5 cm)
FC-700-1A Shielded Flat cable to connect 2 racks (65.0 cm)
FC-700-2A Shielded Flat cable to connect 2 racks (81.5 cm)
FC-700-3A Shielded Flat cable to connect 2 racks (98.0 cm)
FC-700-4A Shielded Flat cable to connect 2 racks (110.0 cm)
DF9 Support for a single module
ICP-700-D3R Cable to connect coprocessors
DF90 IMB power cable
DF91 Lateral adapter
DF93 Rack with 4 slots, with diagnostic
DF96 Terminator for the last rack – left side
DF101 Flat cable to connect racks by left side – length 70 cm
DF102 Flat cable to connect racks by right side – length 65 cm
DF103 Flat cable to connect racks by right side – length 81 cm
DF104 Flat cable to connect racks by right side – length 98 cm
DF105 Flat cable to connect racks by right side – length 115 cm
Installing the system’s base with DF93 racks
In the following figure is shown the DF93 rack with its components.
Figure 2.2 - DF93 components
A – DIN rail - Base for rack connection. It should be tightly fixed to the place where the rack is being
mounted.
B – Lateral adapter DF91 – It allows the connection of DF90 cables to rack.
To Next Page
Loading...