C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 47
Sets the starting rate of deceleration change on normal
profile runs
Sets the rate of deceleration change when approaching
a floor on normal profile runs
Sets the distance from a floor at which the car
transitions to leveling speed on normal profile runs
Sets the max acceleration rate used on inspection profile
runs
Sets starting rate of acceleration change on inspection
profile runs
Sets the rate of acceleration change when approaching
max speed on inspection profile runs
Sets the max deceleration rate used on inspection
profile runs
Sets the max acceleration rate used on emergency
power profile runs
Sets starting rate of acceleration change on emergency
power profile runs
Sets the rate of acceleration change when approaching
max speed on emergency power profile runs
Sets the max deceleration rate used on emergency
power profile runs
Sets the starting rate of deceleration change on
emergency power profile runs
Sets the rate of deceleration change when approaching
a floor on emergency power profile runs
Sets the distance from a floor at which the car
transitions to leveling speed on emergency power
profile runs
Sets the max acceleration rate used on short profile runs
Sets starting rate of acceleration change on short profile
runs
Sets the rate of acceleration change when approaching
max speed on short profile runs
Sets the max deceleration rate used on short profile
runs
Sets the starting rate of deceleration change on short
profile runs
Sets the rate of deceleration change when approaching
a floor on short profile runs