S
PANNING
T
REE
A
LGORITHM
C
ONFIGURATION
2-93
information about topology changes before it starts to forward frames.
In addition, each port needs time to listen for conflicting information
that would make it return to a discarding state; otherwise, temporary
data loops might result.
• Root Hold Time* – The interval (in seconds) during which no more
than two bridge configuration protocol data units shall be transmitted
by this node.
• Configuration Changes – The number of times the Spanning Tree
has been reconfigured.
• Last Topology Change – Time since the Spanning Tree was last
reconfigured.
* CLI only.
Web – Click Spanning Tree, STA, Information.
To Next Page
Loading...
