SMC Networks 6724AL2 User Manual

A UTHENTICATION C OMMANDS
3-155
TACACS+ Client
tacacs-server host Specifies the TACACS+ server GC 3-162
tacacs-server port Specifies the TACACS+ server network
port
GC 3-162
tacacs-server key Sets the TACACS+ encryption key GC 3-163
show tacacs-server Shows the current TACACS+ settings GC 3-163
Port Authentication
authentication dot1x
default
Sets the default authentication server type GC 3-164
dot1x default Resets all dot1x parameters to their
default values.
GC 3-164
dot1x max-req Sets the maximum number of times the
switch will attempt to send a request to
the client before authentication fails
GC 3-165
dot1x port-control Sets dot1x mode for a port interface IC 3-165
dot1x re-authenticate Forces a re-authentication on specific
ports
PE 3-166
dot1x
re-authentication
Enables re-authentication for all ports GC 3-167
dot1x timeout
quiet-period
Sets the time that a switch port waits after
the Max Request Count has been
exceeded before attempting to acquire a
new client
GC 3-167
dot1x timeout
re-authperiod
Sets the time period after which a
connected client must be re-authenticated
GC 3-168
dot1x timeout
tx-period
Sets the time period during an
authentication session that the switch
waits before re-transmitting an EAP
packet
GC 3-168
show dot1x Shows all dot1x related information PE 3-169
Command Function Mode Page

SMC Networks 6724AL2 Specifications

General

Brand	SMC Networks
Model	6724AL2
Category	Switch
Language	English