SMC Networks 6724AL2 User Manual

C OMMAND L INE I NTERFACE
3-172
IP ACLs
Command Function Page
IP ACLs Configures ACLs based on IP addresses, TCP/UDP
port number, protocol type, and TCP control code
3-173
MAC ACLs Configures ACLs based on hardware addresses and
Ethernet type
3-183
ACL Information Displays ACLs and associated rules; shows ACLs
assigned to each port
3-187
Command Function Mode Page
access-list ip Creates an IP ACL and enters configuration
mode
GC 3-174
permit, deny Filters packets matching a specified source IP
address
STD-
ACL
3-175
permit, deny Filters packets meeting the specified criteria,
including source and destination IP address,
TCP/UDP port number, protocol type, and
TCP control code
EXT-
ACL
3-176
ip access-group Adds a port to an IP ACL IC 3-179
show ip
access-group
Shows port assignments for IP ACLs PE 3-179
show ip access-list Displays the rules for configured IP ACLs PE 3-180
map access-list ip Sets the CoS value and corresponding output
queue for packets matching an ACL rule
IC 3-181
show map
access-list ip
Shows CoS value mapped to an access list for
an interface
PE 3-182

SMC Networks 6724AL2 Specifications

General

Brand	SMC Networks
Model	6724AL2
Category	Switch
Language	English