C
ONFIGURING
THE
S
WITCH
2-44
Command Attributes
• SSH Server Status – Allows you to enable/disable the SSH server
feature on the switch.
(Default: Enabled)
• SSH Authentication Timeout – Specifies the time interval in
seconds that the SSH server waits for a response from a client during
an authentication attempt.
(Range: 1 to 120 seconds; Default: 120 seconds)
• SSH Authentication Retries – Specifies the number of
authentication attempts that a client is allowed before authentication
fails and the client has to restart the authentication process.
(Range: 1-5 times; Default: 3)
Web – Click Security, SSH Settings. Enable SSH and adjust the
authentication parameters as required, then click Apply.
To Next Page
Loading...
