SMC Networks 6724AL2

C ONFIGURING P ORT S ECURITY
2-47
Web – Click Security, Port Security. In the Status column for a port, select
Enabled, then set the required Max MAC Count and click Apply.
CLI – This example selects the target port, then uses the port security
max-mac-count command to set the maximum MAC addresses allowed
on the port. Use the port security command to enable security for the
port.
Console(config)#interface ethernet 1/5
Console(config-if)#port security max-mac-count 10
Console(config-if)#port security
Console(config-if)#