Chapter 6 DME Wipes
363
DME Wipe Settings for Independent Key Transitions
To crop to 4:3 in 16:9 mode
In the <Crop Mode> group, press [4:3 Crop], turning it on.
To set the operation for DME wipe crop transition execution
1
In the <Crop Mode> group of the Key1 DME Wipe Adjust menu, press
[Crop], turning it on.
2
In the <Crop Mode> group, press [Crop] or [4:3 Crop] (to crop to 4:3 in
16:9 mode), turning it on.
3
In the <Crop Mode> group, press [Remove From Begin].
The Remove From Begin menu appears.
For subsequent operations, see step 5 of “To set the action when a DME
wipe crop transition is executed” (page 357).
To set the timing of transition completion
1
In the <Crop Mode> group of the Key1 DME Wipe Adjust menu, press
[Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From Begin].
For subsequent operations, see “Setting the timing of transition
completion” (page 358).
Applying a border to a key DME wipe
In the <Edge> group of the Key1 DME Wipe Adjust menu, press [Border],
turning it on.
For subsequent operations, use the same process as in step 4 of “Modifying the
DME wipe pattern edge” (page 353).
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Top Cropping of the top of the image –100.00 to +100.00
2 Left Cropping of the left of the image –100.00 to +100.00
3 Right Cropping of the right of the image –100.00 to +100.00
4 Bottom Cropping of the bottom of the
image
–100.00 to +100.00
To Next Page
Loading...
