Spectracom SecureSync 1200 - Page 108

The INFO icon opens a window showing the maximum per second traffic rate from
each.
The graphs maybe saved and downloaded (> ARROWicon), or deleted (> TRASHCAN
icon).
Note that this data is currently only displayed for NTP, and not for TimeKeeper NTP.
The Actions panel
… is in the top left-hand corner of the NTP screen comprises the following buttons:
Symmetric Keys: Click here to set up your symmetric keys for MD5 authentication. For
more information on Symmetric Keys, see "Configuring NTP Symmetric Keys" on
page112.
Access Restrictions: Click here to view, change or delete access restrictions to the NTP
network. (See also "NTP Access Restrictions" on page114.)
Fields in the NTP Access Restrictions table include:
Type
IP Version
IP
IP Mask
Auth only
Enable Query
View NTP Clients: Click here to reveal a table of all the clients your SecureSync is ser
vicing. (See also "Viewing NTP Clients" on page94.)
Information for each client includes:
Client IP
Received Packets
Mode
Version
Restriction Flags
Avg Interval
Last Interval
Restore Default NTP Configuration: Click here to restore SecureSync’s NTP settings to
the factory default. Any settings you have created previously will be lost. See "Restoring
the Default NTP Configuration" on page95.
The NTP Services panel
… is the second panel on the left-hand side of the NTP screen. It has two switches:
92
CHAPTER 2 • SecureSync User Reference Guide Rev. 23
2.15 Configuring NTP