supported. The Group can use the same passphrase (password) or different passphrases for
each client.
An NTP Server Group member is configured by enabling Autokey and creating certificate and
public/private key pair while not enabling the Client Only selection. A Client Only NTP server
is configured by enabling Autokey and creating certificate and public/private key pair and
enabling the Client Only selection.
Note: Passphrases can be identical for all group members and Client NTP Serv-
ers. Or passphrases can be the same for group members and a different pass-
phrase shared between the Client Only NTP Servers.
Figure 2-5: IFF Autokey configuration example
94
CHAPTER 2 • VersaSync User Manual Rev. 6.0
2.7 Configuring Network Settings
To Next Page
Loading...
