168 Maintenance
2006792 Rev B – 200228
Preparing the JetStream for Fewer than 3 Months
Idle
To idle the JetStream for 3 months or fewer:
1. Shut down:
a. Perform the normal shutdown for the end of a workday (see “Shutdown: End of the
Day” on page 132)
2. Run the system once a week:
a. Once a week, start up the system (see “Startup: Beginning of the Day” on page 131)
b. On the Main screen, select Start Jetting:
c. Select “Start Jetting With Cleaning.”
d. Allow the system to jet for at least 2 hours.
3. Perform the normal shutdown for the end of a workday (See “Shutdown: End of the
Day” on page 132)
To Next Page
Loading...
