CAUTION – PROPERTY DAMAGE: Never select “Stop Jetting With
Cleaning” if the Makeup Container is empty. The JetStream will shoot air
instead of makeup through the system, which can increase the likelihood of
a clog.
CAUTION – PROPERTY DAMAGE: “Stop Jetting With” Cleaning should be
used sparingly. It briefly shoots pure makeup fluid through the system.
Frequent use of this function can dilute the ink, resulting in poor print
quality, wasted ink, and the potential to overflow the Mixing Tank.
Stop Jetting With Cleaning:
Stops the steady stream of ink from the Mixing Tank, then sends a jet of pure makeup
through the system.
Start Jetting Without Cleaning:
Stops the steady stream on ink from the Mixing Tank.
Print
Starts printing. The message to be printed is sent to the Printhead, causing a small
percentage of drops to be given an electric charge and exit the Printhead Orifice.
Stop Printing
Stops printing. Does not stop the flow of ink circulating through the system (jetting).
Message
Navigates to the Message screen for creating and editing messages.
To Next Page
Loading...
