NOTE: There is no cap to remove from new Ink and Makeup Container nozzles
before use. The nozzles are sealed by a thin membrane which is punctured during
installation.
3. Remove the Old Container:
a. If changing out an empty Ink or Makeup Container, remove the empty
container by pulling it directly outward. The Ink Container is in the leftmost
bay, and the Makeup Container is in the right bay. Skip this step if installing
Ink or Makeup Containers into an empty Console.
4. Install the New Container:
a. Slide the nozzle end of the new Ink Container into the Ink Container Bay
(leftmost) until the container nozzle fits snugly into the bay’s intake valve.
To Next Page
Loading...
