53
S
1
Tether Wire Location
b. e access panel is attached to the
FLEXiS System via a tether wire inside
the system to prevent it from falling
when removed. Ensure the panel rests
on the tether when it is removed and not
on the medical gas hoses.
Control Cable for a Shelf with Handle
c. Locate the control cable connector in-
side the FLEXiS System.
Data Pass-rough Location
d. Pass the control cable through the data
pass-through on the same side as the
shelf with handle.
e. Connect the control cable to the shelf
and store cable slack inside the FLEXiS
System.
To Next Page
Loading...
Need help?
General
