Suzuki RM-Z250 - Page 148

KICK STARTER 8-7
• Install the kick starter lever onto the kick starter shaft.
NOTE:
When installing the kick starter lever, align the wide spline teeth

G and

H.
• Tighten the kick starter lever bolt to the specified torque.
# Kick starter lever bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the brake pedal. (!16-18)
• Connect the radiator hose. (!19-23)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (!2-11)
• Engine coolant level and coolant leakage (!2-15, -16)
• Smooth movement of kick starter