FRONT FORK AND STEERING 17-7
• With the outer tube compressed by hands, remove the special
tool.
• Loosen the fork cap bolt
1 (sub-tank) and remove the sub-
tank
6 along with the damper rod assembly
7.
• Remove the fork spring
8.
• Remove the dust seal
9.
• Remove the stopper ring
0.
CAUTION
Removing the lock-nut
4 and pushing the inner rod
thread into the damper rod will damage the inner rod
oil seal.
Do not remove the lock-nut
4 from the inner rod.
CAUTION
Do not attempt to disassemble the damper rod assem-
bly.
The damper rod assembly is available only as an
assembly.
CAUTION
Scratches on the inner tube could cause oil leaks.
Avoid scratching when removing.
To Next Page
Loading...
