17-8 FRONT FORK AND STEERING
INNER TUBE
• Separate the inner tube
1 out of the outer tube
2.
• Remove the slide bushing
3 from the inner tube
1.
• Remove the following parts from the inner tube
1.
Guide bushing
4
Seal retainer
5
Oil seal
6
Stopper ring
7
Dust seal
8
DANPER ROD AND COMPRESSION DAMPER UNIT
• Hold the bottom (flat part) of the sub-tank loose the compres-
sion damper unit
1.
• Remove the compression damper unit
1 from the sub-tank
2.
NOTE:
Slowly compress the inner rod
3 until it stops so that the com-
pression damper unit can be removed easily.
To Next Page
Loading...
