FRONT FORK AND STEERING 17-13
• Hold the bottom (flat part) of the sub-tank.
• Tighten the compression damper unit
5 to the specified
torque.
& Compression damper unit: 30 N·m (3.0 kgf-m, 21.5 lb-ft)
• With the damper rod held in vertical position, slowly move the
inner rod several strokes.
• Tighten the lock-nut by hand completely.
• With the damper rod held in vertical position, compress the
damper rod fully to discharge an excess of oil.
NOTE:
Set the compression damper setting to the softest.
• Force out the remaining oil (discharged oil) using compressed
air completely.
100 mm
(3.9 in)
CAUTION
Protect the inner rod end with a rag when compress-
ing the damper rod.
To Next Page
Loading...
