Symmetricom TimeCreator 1000 User Manual

136 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix A Alarms, Events and SNMP Traps
Alarm Messages
16 MTIE35EXC Minor Port <#> has
exceeded the
MTIE-35
threshold,
<value>
Indicates that
the MTIE-35
error has
exceeded the
user-set
threshold
Check cable and
NE on that port
Port <#> is within
the MTIE-35
threshold,
<value>
Indicates that
the MTIE-35
error is within
the user-set
threshold
No action required
17 PPJEXC Minor Port <#> has
exceeded the
P-P Jitter
threshold,
<value>
Indicates that
the P-P Jitter
error has
exceeded the
user-set
threshold
Check cable and
NE on that port
Port <#> is within
the P-P Jitter
threshold,
<value>
Indicates that
the P-P Jitter
error is within
the user-set
threshold
No action required
18 FEREXC Minor Port <#> has
exceeded the
FER threshold,
<value>
Indicates that
the Frame Error
Rate has
exceeded the
user-set
threshold
Check cable and
NE on that port
Port <#> is within
the FER
threshold,
<value>
Indicates that
the Frame Error
Rate is within
the user-set
threshold
No action required
19 PWRFAIL Major Power Module
<#> output failure
Power module A
or B output
voltage failure
Re-seat the power
module, if issue is
not resolved,
replace module
Power Module
<#> output failure
cleared
Power module A
or B output
voltage OK
No action required
Table A-2. System Notification Messages - Alarms (Continued)
Index
Trap Name
(trapID)
Severity
(default)
Trap Messages
(trapDescription)
Description
Corrective
Action

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English